Device drive mode: manual flip
Installation method: on the bus floor
The manual flip guide device is developed with reference to similar
products in European and American countries, and can be widely used
in low-floor buses, city buses and low-floor vans. This device is
installed on the floor at the side door of the vehicle. This device
is purely manual operation. When necessary, pull the ring on the
guide plate to turn the guide plate to the ground. When the guide
plate is turned to the ground, the guide plate and the ground form
a slope, which can facilitate the wheelchair to enter and exit the
The manual flip guide device is easy to operate, light and safe.
The pure manual operation has the characteristics of strong
independence and does not require the use of vehicle power. After
the installation is completed, the upper plane of the guide plate
device is flush with the floor of the vehicle, which does not
affect the appearance of the vehicle and does not affect the
passage of passengers.
The working guide plate adopts waterproof sand skin + aluminum
honeycomb panel, which has light weight, strong bearing capacity
and excellent corrosion resistance.
Technical Specifications :
Self weight : 35kgs
Loading Capacity : 350kgs
If you are interested,pls kindly contact with me.
Kate Liu(sales manager)
Circle Bus Door Systems Co.,Ltd
Tel: 0086 13770850076